Product
Weight cushion type M2428-15
Minh Quan Technology Joint Stock Company
Hotline: 01692 114 683
Mr Que: 0973 852 363
Ms Ha: 0165 2197 433
Email: mqtekvietnam@gmail.com
Call usProduct information
- custom made weight cushion, capacity up to 500’000kg
- made in Ni-Cr steel
- programmable
- other types
Product Details
The custom made weight cushion type M2428-15 is made in Ni-Cr steel to a capacity of up to 500’000kg.
The cushion is made for very large axial loads. Large reactors, containers and silos etc. are measured with this low cost, low profile sensor. The sensor generates a signal of 4…20mA for a specified load. Simple construction allows production of the customer specified cushion in low quantities.
A ceramic measuring element with a full bridge strain gage bridge converts loads or forces via the internal pressure of the cushion with the integral electronics into a 4…20mA 2-wire signal. There is no need for a sensitive strain gage amplifier and its calibration. Process control computers, controllers, limit switches or display systems can be easily connected to the sensor. The cushion is water proof and has a common 3-pole solenoid plug.
Reviews
Related Products
Load cell type M2428-14
Code: Product Details The M2428-14 is a low-cost load cell to measure weights or forces in the range of 25kg (~250N) to 30'000kg (~300'000N). The bending beam consists of a strain gage sensor with integrated electronics to convert the force or weight to a 4…20mA signal. There is no need to use external, sensitive strain gage amplifiers or signal conditioning devices. A cell connects directly to any 2-wire sensor input of process control computers or other control equipment and displays. The bending beam confirms the protected class IP67 an delivered with open cable ends. Any range within the measuring range can be programmed. E.g. 45kg to 420kg = 4 to 20mA within a calibrated range of 0 to 500kg.
