Temperature
Isolating amplifier without supply type M8731(EK)
Minh Quan Technology Joint Stock Company
Hotline: 01692 114 683
Mr Que: 0973 852 363
Ms Ha: 0165 2197 433
Email: mqtekvietnam@gmail.com
Call usProduct information
- passive isolating 1:1
- range 0…27mA
Specifications
Type | M8731: Molded plastic, gray, 35mm mounting rail, EN50022-35
M8731EK: 4 x M8731 eurocard, 19″ rack mounting, 100x160mm, 6TE |
Input | |
Input current (IE ): | 0…5mA, 0…20mA, 4…20mA, max. 27mA |
Max. Input current: | 50mA (= thermal limitation) |
Max. Input voltage(U ): | +20V |
Max. voltage drop: | 3,7V |
Output | |
Current transfer ratio (I : I ): | 1,0 : 1,0 |
Load: | ≤500Ω |
transfer gain error: | See diagram Fig. 1, Typ. ±0,1% @ 280W |
Output ripple: | 0,9% (R =280W, I =20mA, f=3,5kHz) |
Rise time: | Typ. 75ms |
Working temperature range | -10 to +60°C (max. ± 0,1%/20mA) |
Coupling | |
Internal oscillator: | Typ. 3,5 kHz with MosFet-switches |
Max. common mode voltage (U ): | 230Veff, V 2500Veff/1minute. |
Operation principle: | The input current is chopped with 3.5 kHz, transformed from the primary to the secondary by a transformer, rectified and filtered, see block diagram |
Supply: | None, ~40µA will be drawn out of the primary signal |
CE Conformity: | fulfilled |
Reviews
Related Products
Load cell type M2428-14
Code: Product Details The M2428-14 is a low-cost load cell to measure weights or forces in the range of 25kg (~250N) to 30'000kg (~300'000N). The bending beam consists of a strain gage sensor with integrated electronics to convert the force or weight to a 4…20mA signal. There is no need to use external, sensitive strain gage amplifiers or signal conditioning devices. A cell connects directly to any 2-wire sensor input of process control computers or other control equipment and displays. The bending beam confirms the protected class IP67 an delivered with open cable ends. Any range within the measuring range can be programmed. E.g. 45kg to 420kg = 4 to 20mA within a calibrated range of 0 to 500kg.