Ultrasonic flowmeters
The FLOMIC FL3085 ultrasonic flow meter for large dimensions
Minh Quan Technology Joint Stock Company
Hotline: 01692 114 683
Mr Que: 0973 852 363
Ms Ha: 0165 2197 433
Email: mqtekvietnam@gmail.com
Call usProduct information
The FLOMIC FL3085 ultrasonic flow meter is intended to measure and store instantaneous flow rate data and the total volume of liquid passed through the metering point in fully-flooded piping of large sizes. The only requirement of the measured fluid is that it allows for the undisturbed propagation of ultrasonic waves.
High accuracy measurement is achieved thanks to the calibration of the flow meter performed on a test rig. The FLOMIC FL3085 flow meter does not require an external power source. It is equipped with an internal battery and can be installed anywhere without available external power. The guaranteed battery life is 4 years.
Apart from the measurement and visualization of data on the instantaneous flow rate and aggregate volume of the fluid passed through the meter, the electronic accessories of the meter make it possible to store the data measured at regular intervals in its own data log and to communicate data via standard electrical outputs to a master control system.
Specifications
Technical parameters: |
||
| usage | measuring the total volume of water passed and instantaneous flow rate | |
| measurement principle | transit-time | |
| type | one beam (1B) | |
| dimension range | DN200 to DN1200 | |
| measurement accuracy | ±2% using theoretical calibration ±1% using test rig calibration |
|
| flow sampling period | 1sec | |
| measured fluid temperature | up to 150°C | |
| pressure | standard PN10 | |
| electrical outputs | pulse and current | |
| protection | IP54 / IP68 – sensor IP65 electronics |
|
| power source | Li-battery 3.6 V, 16 Ah, 2x Alcaline 9V battery live time 4 years |
|
Reviews
Related Products
Load cell type M2428-14
Code: Product Details The M2428-14 is a low-cost load cell to measure weights or forces in the range of 25kg (~250N) to 30'000kg (~300'000N). The bending beam consists of a strain gage sensor with integrated electronics to convert the force or weight to a 4…20mA signal. There is no need to use external, sensitive strain gage amplifiers or signal conditioning devices. A cell connects directly to any 2-wire sensor input of process control computers or other control equipment and displays. The bending beam confirms the protected class IP67 an delivered with open cable ends. Any range within the measuring range can be programmed. E.g. 45kg to 420kg = 4 to 20mA within a calibrated range of 0 to 500kg.
