Ultrasonic flowmeters
The FLOMIC FL3005 ultrasonic flow meter for direct internal installation in a piping assembly
Minh Quan Technology Joint Stock Company
Hotline: 01692 114 683
Mr Que: 0973 852 363
Ms Ha: 0165 2197 433
Email: mqtekvietnam@gmail.com
Call usProduct information
The FLOMIC FL3005 ultrasonic flow meter is designed for the convenient measurement of instantaneous flow rate and flow volume values on large-diameter pipelines up to 2000mm; the measured data are easy to read, and the meter itself is very reliable and requires only simple maintenance procedures. The FLOMIC FL3005 is installed directly into the existing pipeline and theoretical calibration is made after installation.
It is equipped with an internal battery and can be installed anywhere without available external power.
Specifications
Technical parameters: |
|
| usage | measuring the total volume of the water passed and instantaneous flow rate |
| measurement principle | transit-time |
| type | – one beam (1B) – remote version |
| dimension range | DN200 to DN2000 |
| measurement accuracy | ±2.0% with theoretical calibration |
| flow sampling period | 1 sec |
| measured fluid temperature | up to 150°C |
| pressure | up to PN40 |
| electrical outputs | pulse and current |
| protection | IP54 / IP68 – ultrasonic transductors IP65 electronics |
| power source | Li-battery 3.6V, 16,5Ah, 2x Alcaline 9V battery life time 4 years |
Reviews
Related Products
Load cell type M2428-14
Code: Product Details The M2428-14 is a low-cost load cell to measure weights or forces in the range of 25kg (~250N) to 30'000kg (~300'000N). The bending beam consists of a strain gage sensor with integrated electronics to convert the force or weight to a 4…20mA signal. There is no need to use external, sensitive strain gage amplifiers or signal conditioning devices. A cell connects directly to any 2-wire sensor input of process control computers or other control equipment and displays. The bending beam confirms the protected class IP67 an delivered with open cable ends. Any range within the measuring range can be programmed. E.g. 45kg to 420kg = 4 to 20mA within a calibrated range of 0 to 500kg.
