Ultrasonic flowmeters
The SONOELIS SE806X ultrasonic flow meter for direct internal installation in a piping assembly
Minh Quan Technology Joint Stock Company
Hotline: 01692 114 683
Mr Que: 0973 852 363
Ms Ha: 0165 2197 433
Email: mqtekvietnam@gmail.com
Call usProduct information
The SONOELIS SE 806X dual beam ultrasonic flow meter comes with ultrasonic probes fitted directly in the piping. The probes measure the instantaneous flow rate and total volume of liquid passed through the sensor in large-sized, fully-flooded pipes.
The measurement principle makes it possible to measure all types of liquid media in which the propagation of ultrasonic signals are reasonably well provided for, including electrically non-conductive and corrosive liquids.
To ensure high accuracy measurement, theoretical calibration is performed after the meter is installed in the piping.
The electronic unit of the meter can be configured in either the ECONOMIC, STANDARD or COMFORT modes, according to the customer’s requirements.
Specifications
Technical parameters: |
|
| usage | measuring conductive or non-conductive and aggressive liquids |
| type | direct assembly in the piping |
| number of beams | two beam (2B) |
| dimension range | DN200 to DN1200 |
| measurement accuracy | ±1% for v > 0.5m/sec |
| easured fluid temperature | 0°C to 180°C |
| nominal pressure PN | 16, 40 |
| electrical outputs | standard |
| communication | RS 485 line |
| power source | 90 – 260V AC |
Reviews
Related Products
Load cell type M2428-14
Code: Product Details The M2428-14 is a low-cost load cell to measure weights or forces in the range of 25kg (~250N) to 30'000kg (~300'000N). The bending beam consists of a strain gage sensor with integrated electronics to convert the force or weight to a 4…20mA signal. There is no need to use external, sensitive strain gage amplifiers or signal conditioning devices. A cell connects directly to any 2-wire sensor input of process control computers or other control equipment and displays. The bending beam confirms the protected class IP67 an delivered with open cable ends. Any range within the measuring range can be programmed. E.g. 45kg to 420kg = 4 to 20mA within a calibrated range of 0 to 500kg.
