Slide ảnh 1
Slide ảnh 2

Ultrasonic flowmeters

The FLOMIC FL5034 ultrasonic flow meter

Product code: FLOMIC FL5034
Category: Product
QTY:
hotro

Minh Quan Technology Joint Stock Company

Hotline: 01692 114 683

Mr Que: 0973 852 363

Ms Ha: 0165 2197 433

Email: mqtekvietnam@gmail.com

Call us

Product information

The battery-powered FLOMIC FL5034 ultrasonic flow meter is intended for operational and invoicing measurements of instantaneous flow rate, pressure and consumption in water piping observing the EN 14154 standard in water works, water distribution systems and other industrial applications.

The features of FLOMIC flow meters make them suitable for water leak detection and tracking and monitoring the general condition of water supply networks.

Design of the FL 50X4 ultrasonic flow meter

These flow meters are of a compact design in the IP 68 protection class. They are characterized by high accuracy measurement and long-term stability over a wide range of measured values. The meters do not need any external power supply, do not include any moving parts and have significantly lower hydraulic losses.

These meters use a single-beam transit-time pulse measurement method based on evaluating the time needed for an ultrasonic signal to cross the distance between two measuring transductors. In the standard version, the meter measures instantaneous flow rate (in m3/hour) and the total volume of water passed through the meter (in m3) in the given flow direction.

The measured data are converted into passive pulse output signals. The meter output signals can be connected via data transfer systems to remote computer control stations. The flow meter electronics also include data storage with various connection possibilities (GSM module, RS232, optical data probe). This feature can be useful for measuring distant points without electricity.

FLOMIC FL 50X4 flow meters can effectively save customers money everywhere water measurements are necessary and it is impossible or too expensive to connect to the power grid.

Specifications

Technical parameters

usage measuring the total volume of water passed, instantaneous flow rate and pressure
measurement principle transit-time
type – one beam (1B)
– compact or remote version
dimension range DN32 to DN300
measured fluid temperature up to 130°C
pressure up to 4.0 MPa
flow sampling period 1 sec
electrical outputs pulse and current
interface optical probe, RS 232, GSM module
data storage data archive
power source Li battery 3.6V, 16Ah, lifetime 8 years
protection class IP68

Reviews

Comment

Your email address will not be published. Required fields are marked *

Related Products

Load cell type M2428-14

Code: Product Details The M2428-14 is a low-cost load cell to measure weights or forces in the range of 25kg (~250N) to 30'000kg (~300'000N). The bending beam consists of a strain gage sensor with integrated electronics to convert the force or weight to a 4…20mA signal. There is no need to use external, sensitive strain gage amplifiers or signal conditioning devices. A cell connects directly to any 2-wire sensor input of process control computers or other control equipment and displays. The bending beam confirms the protected class IP67 an delivered with open cable ends. Any range within the measuring range can be programmed. E.g. 45kg to 420kg = 4 to 20mA within a calibrated range of 0 to 500kg.

Our partner

01692 114 683